Download the LIFX app to enjoy all the features.
Your new LIFX®. We’re here to make light smarter. This one you can control with your smartphone, tablet and voice assistant—or even a regular light switch if need be. You can use partner automations or in-app features to make your life easier. To get the most out of your product, we suggest you use the LIFX app as your main control centre, where you can keep your products up to date and access the full feature set. This is also where you’ll find Scheduling, Scenes and many exclusive Effects.
Installation. Your Beam can be applied to metal, glass, painted, stained or varnished wood, tile, painted cinder block, plaster, and painted wallboard. In all cases ensure that the surface is a flat, clean, sealed and hard. Clean the surface with isopropyl rubbing alcohol, gently wiping and leave to dry. Do not use other cleaning substances. To apply to the wall, remove the back Command Strip™ liner, and push the product firmly on the wall for 30 seconds, putting pressure on each contact point. 1 .
5 . Hold the push button on the controller for 5 seconds to factory reset. 6 . Hold the push button on the controller for 1 second to detect new light bars when extending your light.
Setting up is easy. There are two options for setting up your LIFX light: The LIFX app - this is usually the best way to set your lights up and is recommended for all users. Apple HomeKit - optional for Apple HomeKit users who want to exclusively use the Home App.
LIFX app Set-up. 1 . Power on your LIFX light 2 . Download the LIFX app 3. O pen the app and follow the prompts on screen. You will need to create your LIFX account to login to the app. You will be asked to connect to your Wi-Fi network and enter your Wi-Fi password. Technical Requirements: A device running iOS 12.0+ or Android 7.0+ A Wi-Fi internet connection. Wi-Fi access point must be 802.
HomeKit™. 1. 2. 3. OR Power on your LIFX light Get the Apple Home App Use the camera on your iOS device to scan the Homekit QR code on the back of this manual Open the Apple Home App and click or “add accessory” Technical Requirements: To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS is recommended. An internet / data connection is required while setting up Apple HomeKit as you will need to connect your LIFX product to your Wi-Fi access point / router.
FAQS Connectivity, setup and troubleshooting What type of Wi-Fi do I need ? Like many devices, LIFX lights connect to the 2.4Ghz band of Wi-Fi, not 5Ghz. If you have more than one available network on your router, this could mean you are connected to 5Ghz and need to try your other network. Almost all Wi-Fi routers will have a 2.4 GHz band so if you only have one network you will likely be on the right one to get started.
Regulations & Compliance. EU Declaration of Conformity English: LIFX complies with all applicable EU standards. Contains IC: 11475A-LCM3. The simplified EU declaration of conformity is drawn up as follows: The undersigned LIFI labs declares that a radio equipment as LIFX Beam complies with Directive 2014/53 / EU. The full text of the EU declaration of conformity is available at the following internet address www.lifx.com/compliance. Français: LIFX est conforme à toutes les normes européennes applicables.
simplificada foi elaborada da seguinte forma: A LIFI Labs, abaixo assinada, declara que um equipamento de rádio como LIFX Beam cumpre a Diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE está disponível no seguinte endereço www.lifx.com/compliance. FCC Compliance Statement U.S. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
interference it is recommended that the user try: a. relocating the device to a different place; b. adjust the antenna on the receiving device; c. consult a technician experienced in radio interference. Notices • T his device is not intended for use with emergency exits • Use in open luminaire only • Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
Exclusions & Limitations This Limited Warranty applies only to the Product manufactured by or for LIFX that can be identified by the “LIFX trademark, trade name, or logo affixed to it. The Limited Warranty does not apply to any (a) LIFX products and services other than the Product, (b) non- LIFX hardware product, (c) consumables (such as batteries), or (d) software, even if packaged or sold with the Product or embedded in the Product.
Consumer Protection Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state to state.
Product Details Chromaticity co-ordinates: coloured light x < 0,270 or x > 0,530 y < – 2,3172 x2 + 2,3653 x – 0,2199 or y > – 2,3172 x2 + 2,3653 x – 0,1595 FEIT ELECTRIC CO. is the exclusive owner of rights and interests in and to the mark LIFX and the LIFX logo. Covered by patents. lifx.com/patents ©2022 All rights reserved. For more information visit lifx.com Equipment : This symbol on the product indicates that this product shall not be treated as household waste.
This is your Apple HomeKit QR code.
