Use and Care Manual

ManualsBrandsLIFX ManualsLED Bulbs75W Equivalent BR30 Multi-Color Dimmable Wi-Fi Smart LED Light Bulb

Please read this safety information carefully and keep this user manual for later reference.

This LED bulb is for indoor use only. Please disconnect this bulb from bulb holder before cleaning. Don‘t use liquid

or spray detergent for cleaning. Drop or fall could cause injury. To install the bulb, the bulb holder must match the

bulb base. Never pour any liquid onto this bulb, this could cause fire or electric shock.

Please make sure the voltage of the LED bulb is compatible with the mains electricity of your country before

connecting to a bulb holder. Please keep this bulb away from humidity and follow the correct installation

instructions.

LIFX® LED bulbs work without damage or functional issues when used on a dimmer circuit with the dimmer set to

maximum. If the dimmer is set lower than maximum, the power supply control provides protection. When using a

dimmer circuit, we recommend keeping the dimmer set to maximum, to provide the most efficient power to the

lamp.

For the GU10 downlight please ensure the bulb is used in a VERTICAL MOUNTING POSITION ONLY.

WARNING & CAUTIONS

CHANGES & MODIFICATION

Changes or modifications made to this device may void certification of the device. Changes or modifications made

to this unit not expressly approved by the party responsible for compliance could void the user‘s authority to

operate the equipment.

RECOMMENDED INSTALLATION REQUIREMENTS

This device should only be installed in light fittings and fixtures that are designed to accept each fitting. Lamps,

fittings and fixtures that are designed to accept smaller or lower wattage light bulbs may result in the LIFX® bulb

operating below its optimal capacity. For optimal performance it is recommended that LIFX® bulbs be fitted into

fixtures that provide sufficient air flow through and around the bulb. It is recommended that the LIFX® bulb be

installed away from other devices designed to receive or transmit radio signals. It is recommended LIFX® bulb/s be

installed and operated at a minimum distance of 30 cm from the body.

LIFX® is not designed for use in:

 Enclosed fixtures that limit the flow of air and/or trap excessive amounts of heat

 Emergency exits or emergency lights

 Conjunction with 3rd party sensors/timing devices that are not approved by LIFX®

 Light fittings that incorporate dimmers not compatible with LIFX® (see support.lifx.com for a list of compatible

dimmers)

 Places where there is a risk of electric shock

 Outdoor areas

 Wet or damp conditions

Summary of content (6 pages)

PAGE 1
Please read this safety information carefully and keep this user manual for later reference. This LED bulb is for indoor use only. Please disconnect this bulb from bulb holder before cleaning. Don‘t use liquid or spray detergent for cleaning. Drop or fall could cause injury. To install the bulb, the bulb holder must match the bulb base. Never pour any liquid onto this bulb, this could cause fire or electric shock.
PAGE 2
         Sockets that are not rated for this bulb Sockets that utilize a 3rd party adapter Excessively hot environments (e.g. close to ovens, radiators, heaters, etc.) Regions or countries other than that in which the product was intended for. Switch off the power supply to the socket and allow sufficient time for the bulb to cool before removing a LIFX® bulb from the fitting. Do not open device, as this will void the warranty. Do not place in reach of children.
PAGE 3
GETTING STARTED LIFX® is an Internet-connected, Wi-Fi enabled, energy efficient LED light bulb that you control with your iOS or Android smartphone or tablet. With the LIFX® app you can switch bulbs on and off, dim, adjust brightness and color, set different scenes and set wake up and sleep timers. You can control individual bulbs, rooms, or the entire house with the app. LIFX® still functions like a normal light bulb by switching on and off at a regular light switch.
PAGE 4
SYSTEM REQUIREMENTS To run LIFX® it is essential you have:  A device running iOS 8.0+, Android 4.0+ or Windows 10  A Wi-Fi Internet connection (Wi-Fi access point must be 802.11b, g or n compliant with WPA2 security and a DHCP-configured connection available for every connected LIFX® bulb.) NEW BULB SETUP 1. 2. 3. 4. 5. 6. 7. 8. Download the LIFX app from: lifx.com/go Open the LIFX app, tap Get Started, and enter your email address to create your LIFX account. Place your bulb into a socket and power on.
PAGE 5
RESETTING A BULB To reset an A21 or GU10 LIFX® bulb flip the reset switch on the back of the bulb to a different position than previous while the bulb is on. The bulb will flash a reset sequence of red, green, blue and white light to indicate it has reset. The bulb is now available for on-boarding to a Wi-Fi network via the app. To reset the A19 LIFX® bulb power the bulb off and on via the light switch for a total of 5 times in a moderate rhythm.
PAGE 6
device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. Made in China.  THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXIT  USE IN OPEN LUMINAIRE ONLY  ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREESTANDING PORTABLE LUMINAIRE This device complies with Industry Canada license-exempt RSS standard(s).