Instruction Manual
General Description
A Division of:
Light Engineered Displays, Inc.
109 Portwatch Way
Wilmington, N.C. 28412
Phone: (800) 251-2512
Fax: (800) 251-9878
Internet: www.ledinc.com
Email: sales@ledinc.com
AMC
SERIES
AMC-5107
LEAK /LEVEL / VAPOR
MONITOR
The AMC-5107 offers all of the features
you need for your basic leak and level
detection applications. It works with all
of the standard 5000 series liquid sen-
sors and F4000 vapor sensor.
The AMC-5107 is suitable for large or
small scale tank and piping installa-
tions, for secondary containment and
interstitial monitoring, and for fuel oil
storage or bulk water tanks. Wherever
the possibility of leaking petroleum
liquid, vapor or water can occur, and for
level monitoring, trust the AMC-5107 for
worry-free performance.
Features
Easy to wire
Can be powered from 12VDC or
10VAC
Level monitoring, leak detection
Multiple sensor input capability
Programmable internal relay
6 liquid zones, Intrinsically Safe
1 vapor zone, non I-S
Two stage self-test
Relay (dry contacts) can be set
normally energized. Rated 5A @
250VAC/30VDC
Specific channels can be tied to relay
Front panel label for sensor locations
Alarm acknowledge
(as on AMC-5100)
Acknowledged audio alarm will
reactivate after a 2 hour delay
Benefits
Affordable, low priced
Reduces insurance coverage
Very effective for small installations
Capable of a wide variety of
applications
No documentation needed to find
sensor location
Will reset on power failure conditions
Only have specific channels trigger
relay for selective alarming ability
(i.e. Shut down on petroleum leak,
not on water).
For liquid substance monitoring:
Petroleum, alkalines, acids, water, etc...