Owners manual

ManualsBrandsLightaccents ManualsFloor LampsLight Accents 100 Watt Floor Lamp Silver Finish with White Plastic Shade (Silver)

FLOOR LAMP

PACKAGE CONTENTS

1. Lay out all lamp parts from box and put them on a flat surface.

2. Screw pole (B) onto lamp base (A) clockwise to tighten.

3. Screw pole (C) into pole (B) clockwise to tighten.

CARE AND MAINTENANCE

• Clean with soft dry cloth. Do not use abrasives.

• Bulb replacement:

ASSEMBLY AND INSTALLATION INSTRUCTIONS

WARNINGS AND CAUTIONS

Before beginning assembly and installation of product, make sure all par

are present. Compare parts with package contents list and diagram abov

If any part is missing or damaged, do not attempt to assemble, install or

operate the product. Contact customer service for replacement parts.

PREPARATION

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Lamp base

Pole

J-box

Lamp shade

MODEL #

Questions?

CS@lightaccents.com

6113

. Screw J-box part (G) into p ockwise to tighten. You may need to

pull any excess cord gently through the poles so that these parts fit.

. Insert lamp shade (H) onto the J-box (G), and tighten with sock

9. Install light bulbs. Only use bulbs of the specified type and maximum

rated wattage or less.

This portable lamp has a polarized plug (one blade is wider than the

other). As a safety feature to reduce the risk of electrical shock and ﬁre, this

plug will ﬁt in a polarized outlet only one way. If the plug does not ﬁt fully

in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed

electrician. Never use with an extension cord unless the plug can be fully

inserted. Do not alter this plug. Save these instructions for future refence.

ole (F) cl

et nut (I).

Light bulb

(not included)

Pole

Socket nut

4. Screw pole (D) into pole (C) clockwise to tighten.

5. Screw pole (E) into pole (D) clockwise to tighten.

6. Screw pole (F) into pole (E) clockwise to tighten.

Printed in China

Use a 3-way 100W type A bulb or CFL bulb equivalent. (Bulb not

included)

Shut off main power supply before replacing bulbs.

PLEASE NOTE: Socket Nut is Located On The Lamp Socket.

Please Remove Before Adding Shade.

Summary of content (1 pages)

PAGE 1
MODEL # 6113 Questions? Contact us: CS@lightaccents.com FLOOR LAMP PACKAGE CONTENTS A Lamp base B Pole C Pole D Pole E Pole F Pole G J-box H Lamp shade Socket nut Light bulb (not included) WARNINGS AND CAUTIONS CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way.