User's Manual

JDVD1500

Preset Stations

Six numbered preset buttons store and recall stations for each band.

Store a Station

Select a band (if needed), then select a station. Press and hold a preset button (9-14) for three

seconds. The preset number will appear in the display.

Recall a Station

Select a band (if needed). Press a preset button (9-14) to select the corresponding stored station.

Automatically Store / Preset Scan

Automatically Store

Select a band (if needed). Press AS/PS (15) for more than three seconds to automatically select six

strong stations and store them in the current band. The new stations replace any stations already

stored in that band.

Preset Scan

Select a band (if needed). Press AS/PS (15) to scan stations stored in the current band. The unit

will pause for ten seconds at each preset station. Press AS/PS again to stop scanning when the

desired station is reached.

Stereo

The unit will automatically pick up a stereo signal, when available. When in stereo mode, the “ST”

icon appears in the display. When no stereo signal is available, the unit will automatically revert to

mono operation, and no icon will be displayed.