User's Manual

JDVD1500

actory maximum screw size. Longer

Mounting

screws may damage

Bracket

components inside the

chassis.

4. Wire the new radio to the

Hook

(Remove)

vehicle as outlined in the

Universal Installation instructions.

5. When wiring is complete, reconnect the

battery negative terminal.

6. Mount the new radio assembly to the dashboard or center console using the reverse

procedure of step 1.

CAUTION:

• DO NOT insert the DCP from the left side. Doing so may damage it.

• The DCP can easily be damaged if dropped or subjected to a strong shock. When the

release button is pressed and the DCP is unlocked, the vehicle's vibrations may cause

it to fall. To prevent damage to the DCP, always store it in a protective case after

detaching it.

• The rear connector that connects the main unit and the DCP is an extremely important part.

Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.

• If the DCP is dirty, remove debris with a soft, dry cloth only. You can use a cotton swab

soaked in isopropyl alcohol to clean the socket on the back of the DCP.