User's Manual

General Setup Page Menu
TV Display Wide Normal/PS
Angle Mark O Normal/LB
TV Type NTSC Wide
Screen Saver On
OSD Lang ENG
Last Memory On
Set TV Display Mode
- - General Setup Page - -
TV Display
This item allows you to set the screen display format.
Optional Settings: Normal/PS, Normal/LB, Wide
The default setting is Wide.
Note: This function depends on the aspect ratio with which the DVD disc is recorded.
TV Display Wide
Angle Mark O On
TV Type NTSC O
Screen Saver On
OSD Lang ENG
Last Memory On
Set Angle Mark
- - General Setup Page - -
Angle Mark
This item allows you to turn angle mode playback on or off. Angle mode allows you to select different camera
angles in DVD playback.
Optional settings: On, Off
The default setting is Off.
Note: The number of angles vary from disc to disc. Not all discs contain this option.
TV Display Wide
Angle Mark O
TV Type NTSC PAL
Screen Saver On NTSC
OSD Lang ENG
Last Memory On
Set TV Standard
- - General Setup Page - -
TV Type
This item allows you to select a TV type.
Optional Settings: PAL, NTSC
The default setting is NTSC.
Note: For best system performance, the selected setting should remain at NTSC.
TV Display Wide
Angle Mark O
TV Type NTSC
Screen Saver On On
OSD Lang ENG O
Last Memory On
Set Screen Saver
- - General Setup Page - -
Screen Saver
This item allows you to turn the screen saver on or off.
Optional Settings: On, Off
The default setting is On.
Note: The DVD player will enter screen saver mode if the unit is inactive for approximately four minutes.
13