Manual

TM
Genesis Lighting System Spare Parts and Accessories
For extended accessories and spare parts please contact your local Lightforce dealer or
email [e-mail]
Specifications
Recommended Operating Temperature (ambient)
0 0
40 C (104 F) MAXIMUM
WARRANTY TERMS AND CONDITIONS
AUSTRALIA
LIGHTFORCE AUSTRALIA warrants to the PURCHASER that this product shall be free from defects in design, materials and workmanship, except as otherwise set forth herein, for a
period of 3 years from the date of purchase. The onus of proof of the date of purchase shall lie upon the PURCHASER and if the PURCHASER cannot establish the purchase date by
the appropriate documentary evidence, the purchase will be deemed to have taken place in excess of 3 years from the date upon which the defect occurred. The sole obligation of
LIGHTFORCE AUSTRALIA shall be the repair or (at the absolute option of LIGHTFORCE AUSTRALIA) the replacement of the defective product or part. LIGHTFORCE AUSTRALIA shall
have no other liability to the PURCHASER for any consequential loss including but not limited to loss of income, compensation for personal injury, or injury to property.
INTERNATIONAL
Please consult place of purchase. PLEASE NOTE globes and batteries are not covered by warranty. A dated receipt of proof of purchase must be provided.
All warranties express or implied of merchantability, fitness for a particular purpose and other warranties of whatever kind are, to the extent permitted by law, hereby disclaimed.
Claims under this warranty must be made in writing addressed to LIGHTFORCE AUSTRALIA Pty. Ltd., shall be not be liable for damage, malfunction, failure resulting from accident,
misuse, misapplication, unauthorised repair, neglect, modification, unauthorised or non standard replacement parts, accessories, globes, batteries or voltage or the operation of the
Product beyond its technical and environmental specifications.
The PURCHASER acknowledges that local laws may prohibit the use of some of the Product on motor vehicles travelling on public roads and agrees that it is his/her responsibility to
ascertain the effect of local laws.
DLSB210 Anti Theft Kit for cross bolt Optional Filters
ATN10MM Anti Theft Kit for mounting bolt F210C Spot Clear
MBS Modular Stay Bracket F210CC Combo Clear
F210WC Wide Clear
Replacement Bulbs F210CB Spot Crystal Blue
GL02 Halogen Bulb F210CCB Combo Crystal Blue
GL20 HID Bulb - 3200K Ion yellow F210WCB Wide Crystal Blue
GL21 HID Bulb - 4200K / 35W F210Y Spot Yellow
Gl22 HID Bulb - 5000K / 35W F210CY Combo Yellow
GL27 HID Bulb - 5000K / 50W F210WY Wide Yellow
C210BLK Black opaque (solid)
Operating Voltage (at light) Recommended Wire Size
2
Halogen 2.0mm (14AWG) MINIMUM
12V Light – 14VDC MAXIMUM
HID Mounting Fastener Torque Specifications
35W / 12V Light – 9-16VDC, M10 x 40mm Bottom mount bolt - 70Nm (50lb-ft)
12.8VDC Typ
35W / 24V Light - 21-29VDC, M10 x 110mm Cross-bolt - 40Nm (30lb-ft)
25.6VDC Typ
50W / Multi Voltage 12V-24VDC
GENESiS
MODULAR LIGHTING SYSTEM
USER INSTRUCTIONS
LIGHTFORCE AUSTRALIA
28 Orsmond Street
Hindmarsh SA 5007
Australia
Tel: [phone]
Fax: [phone]
lightforce.com
[e-mail]
Int’l Tel: [phone]
Int’l Fax: [phone]
Head Office: Australian & International enquiries
0
5
25
75
95
100