Specification

ManualsBrandsLighting Science ManualsElectrical40W Equivalent Soft White P15 Sleep-Aid LED Light Bulb

ORDERING INFORMATION \\ DFN A19 60WE SLP 120

Family Product

Wattage Equivalency

Color (CCT) Voltage

LS Lighting Science P15 40WE 40 Watt Equivalent 2300K SLPB SLEEPY BABY 120 Volt

NORTH AMERICAN ENVIRONMENT

CERTIFICATIONS

Beneﬁts

The proprietary LED source works with your body’s natural

circadian rhythm to help baby fall asleep faster and stay asleep

longer. Other lights are more disruptive and don’t support natural

melatonin production.

• Only 3.5W - Requires 85% less power than comparable 40 watt Incandescent

lamp.

• Maintenance free operation, lasts up to 20 times longer than incandescent

lighting.•

877-999-5742 | www.lsgc.com

1830 Penn Street | Melbourne, FL 32901

RHYTHM_LS SLEEPY BABY P15 _40WE_REVB_08-11-15

Speciﬁcations are typical values and may change without notiﬁcation.

Sleepy Baby™LED Nursery Light

FEATURES

Equivalent Source 40W Incandescent

L70 lumen depreciation

design criteria

25,000 hours

Dimmable Yes

Housing Aluminum

Socket E26

Operating Temperature -20˚C to +40˚C

E26 MOL 4.49in, 88.04mm

Voltage 120 VAC

Weight .1 lbs, .045g

Power Factor ≥.8.5

Warranty 5 year limited

SPECIFICATIONS

Part Number Base Type Wattage Lumens Voltage Efﬁcacy CCT

LS P15 40WE SLPB 120 G1 BX E26 3.5W 300 120 80 2300K

CAUTIONS

THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS. CAUTION: RISK OF SHOCK- DO NOT USE WHERE DIRECTLY EXPOSED TO WATER.

TURN OFF POWER BEFORE INSPECTION, INSTALLATION, OR REMOVAL. DO NOT OPEN – NO USER SERVICEABLE PARTS INSIDE. Not for use in totally

enclosed ﬁxtures. This device complies with part 15 of the FCC rules and has been tested and found to comply with the limits for a Class B digital

device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. Any changes or modiﬁcations not expressly approved by the manufacturer could void the user’s authority to operate the

equipment. Suitable for damp locations. Use only on 120 Volt, 60 Hz circuits. Compatible with most dimmer switches.

Speciﬁcations supplied are nominal. Please refer to the DOE’s Lighting Facts Tolerance Guidelines.

Values are nominal, advances from further innovation, speciﬁcations are subject to change.

1.8in

[45mm]

3.5in

[88mm]