User Guide

Hardwire Installation Guide
Hardwire Installation Guide
!
BEFORE YOU BEGIN
24V
DC
■
Read all instructions before installation.
■
■
In order to assure safe use of Lightkiwi® modular under
cabinet lighting, proceed according to the
installation instruction.
Lightkiwi® modular under cabinet lighting is not safe to
use, unless it is completely installed according to the
following instructions.
Caution: Always remember to turn-off the
electric power when performing electric work
Notes
1.
Each and every project is unique. These instructions are given
as know approaches and general guidelines to installing
the product. Your project may dictate an entirely different
installation approach, which makes your installation unique.
If you have questions regarding your installation please send
an email to [e-mail] or contact your local
electrical contractor.
2.
Keep the product away from extreme heat or cold, as
well as any flammable items or damp places. Also avoid
dropping, hitting or throwing the product.
To prevent any hassle after the installation, we recommend
to double check every item operates properly by testing
them without any mounting.
■
Magnetic
Low Voltage
Dimmer Switch
Green Wire
Ground
Red Wire
Positive
Purple Wire
Negative
Input Wire
120V AC
Input Wire
120V AC
+
-
INPUT
120V AC 60Hz
OUTPUT
24V DC
How to Check Positive (+) and Negative (-) of Interconnect Cable
AWM 2468 24AWGX2C VW-1 80°C 300V CR AWM I
Negative (-) wire has
words on it
Positive (-) wire has
white lines on it
In case there is no power from
interconnect cable when connected,
please re-wire the wire in opposite
way to troubleshoot.
Please ensure the wattage of the
combined units do not exceed the
maximum wattage of the power
supply used.
Lightkiwi® Hardwire Installation Guide
www.lightkiwi.com
!
!
Dimmable Transformer