User's Manual

Calculite
®
HID Lensed Wall Wash C6P38MHL
Page 1 of 2 6" Aperture, PAR38/PAR30 Ceramic Metal Halide, Lensed
Features
1. Reflector Trim: Low brightness,anodized aluminum; integral flange in
painted white or polished to match inside of cone.
2. Directional Spread Lens: High temperature, tempered glass. Precisely fits
onto cone; replaceable.
3. Kick Reflector: 0.040” (16 ga.) aluminum. Clear anodized “Kick” reflector with
directional spread lens distributes light smooth for vertical surface wall washing.
4. Socket: Medium base porcelain socket with nickel plated screwshell,
pulse-rated
5.
Frame Housing:
Steel, 0.029" (22-Ga.), matte black finish.
6. Frame Vertical Adjustment Mechanism: Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
7. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
pr
ovide positive attachment to common T
-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
8. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
9.
Ballast / Cover Assembly:
Accessible fr
om below and removable without
tools for inspection and ballast replacement .
10.Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90
°
C thr
ough branch cir
cuit conductors. Allows inspection from below.
11.Thermal Protector: (Not Shown) Meets NEC and UL r
equirements. Do Not
install insulation above nor within 3” (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz. Electronic, encased, high power
factor, T.H.D. <15%, ther
mally and transient pr
otected, RMI/RFI complies with
FCC part 18 non-consumer limits, shut-down circuit at end of lamp life, sound
rating "A", -5° F minimum star
ting temperatur
e, T
ype 1 Outdoor rating.
Electrical (Cont.)
Ballast ANSI Code Voltage Max Amps Input Watts
70W MH M98/M143 120/277 0.67/0.28 78
100W MH M90/M140 120/277 0.90/0.43 110
Magnetic Ballast: 120V/277V Dual Voltage, 60HZ Encased and potted, H8-HPF
Circuit type, high power factor, sound rating “B”, -20° F minimum starting
temperature, type 1 outdoor rating.
Ballast ANSI Code Voltage Max Amps Input Watts
70W MH M98/M143 120/277 1.90/0.80 94
100W MH M90/M140 120/277 2.40/1.10 125
Options and Accessories
Fuse (magnetic ballast): Add suffix F1 or F2 to FIK (F1=120V F2=277V)
Chicago Plenum: Consult Factor
y
.
Labels
UL (Suitable for Damp Locations), CSA (magnetic ballast only), I.B.E.W.
Reflector Trim Frame-In Kit Lamp (Ceramic MH)
C6P38MHL CLW Specular Clear White Painted Flange.
CLP Specular Clear Matching Flange.
CCDW Comfort Clear Diffuse, White Painted Flange.
CCDP Comfort Clear Diffuse, Matching Flange.
CCZW Champagne Bronze, White Painted Flange.
CCZP Champagne Bronze, Matching Flange.
C6A70P38E1 Electronic 120V 70W PAR38 Wide Flood
C6A70P38E2 Electronic 277V 70W PAR38 Wide Flood
C6A10P38E1 Electronic 120V 100W PAR38 Wide Flood
C6A10P38E2 Electronic 277V 100W PAR38 Wide Flood
Magnetic 120V/277V 70W PAR38 Wide Flood
Magnetic 120V/277V 100W PAR38 Wide Flood
910 5 8
1
2
43 67
1 1/8" (29 mm) max.
Ceiling Thickness
5-3/4" (146 mm) Dia.
7-7/8" (181 mm) Dia.
10 7/8" 
(276 mm)
Vertical Adjustment: 
3/4" (25 mm) to 
2 7/8" (73 mm)
5/8" (16 mm)
C
15" (381mm)
10-5/8" 
(270 mm)
20" (508 mm) to
3
0" (762 mm)
T
op View
(Electronic Ballast)
2
0" (508 mm) to
3
0" (762 mm)
10-5/8" 
(270 mm)
15" (381mm)
Top View
(
Magnetic Ballast)
22-1/8" (562 mm)
19-5/8" (498 mm)
19-1/8" (486 mm)
20-1/4" (514 mm)
Ceiling Cutout: 6 9/16" (167mm) Dia.
J
ob Inf
or
ma
tion
T
ype:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
W
e r
eser
ve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0406