Instruction Manual

Classified
page
11/17/2022 4
IS-C4/C6
www.ledalite.com
Calculite LED Gen 3 Cylinder with Remote Driver
Step 5
Install: Mount Stem on top of Luminaire
(Example: Top Cover)
using the supplied Hex Nut to secure (Fig. H).
Step 6
Wire In: Wire Stem supply leads to luminaire.
Use wire nuts or connectors from remote box assembly.
Align Cylinder top cover bolt pattern and use the supplied cover
Screws to secure fixture. (See Luminaire Instructions).
Fig. H
SUPPLY WIRES
(5 WIRE)
STEM OR CABLE
LOCK NUT
BACK COVER
STEM OR CABLE KIT
(STEM SHOWN)
COVER SCREWS X 4
Instructions for Pendant Mount (C4P & C6P Series)
Step 1
Preparation: Install Frame in kit Remote Driver flush with
ceiling. Install stem or cable kit
according to provided kit
instructions. Install Back Cover to the end of stem / cable
kit and secure using provided Lock Nut.
Step 2
Wire In: Wire to LED supply leads
(image is illustrative,
the cylinder can change between models).
Step 3
Install: Place all electrical connections in Cylinder. Align
cylinder Back Cover
bolt pattern and use the supplied
Cover Screws to secure fixture.