Fluorescent Lighting Installation Manual

Features
• Direct/indirect lamp shield appearance.
• Perforated mesh lamp shield with white acrylic overlay.
• Contoured body and ends.
• Air return models meet UL 1598, Paragraph 9.2.2.5 requirements.
• 65.0% efficient (2 lamp T5, 28W).
• 70.8% efficient (2 lamp T5, 54W).
• Spacing to mounting ratio 1.3.
• Only 5" deep.
• Tension bars secure ends to body.
•
Same fixture fits both G and T ceiling.
• Fits flush to face of slot grid (T) ceiling.
• Static models have injection molded light stop at basket ends.
• Perforated lamp shield hinges from either side.
• Ballast accessible from room side.
• Built-in earthquake clips.
• Can be continuous row mounted.
• Wiring access plate standard.
• Construction to meet NYC Code or Chicago Plenum requirement is
available.
Mounting Methods Dimensions
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
11/05
Coffaire II Recessed Fluorescent CFH2GPF228 or 254
Page 1 of 2 Direct/Indirect – 2' x 4' with Perforated Basket
Air Return/Static, 2 Lamp T5
24" (610mm)
5"
(127mm)
2-1/2"
(64mm)
2" x 2-1/2" Access Plate
with (2) 7/8" dia. K.O.
48" (1219mm)
Lightolier a Genlyte company www.lightolier.com
Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2005 a Genlyte company Section 5/Folio M15-40
lamp shield hinges either side
exposed t-grid ceiling
exposed slot t-grid ceiling
Acoustical
material
by others
Exposed T-bar
by others
1-1/2"
max.
Acoustical
material
by others
15/16"
24"
1-7/8"
max.
Exposed T-bar
by others
9/16"
24"
built-in earthquake clips
light stop-static models only