User Guide

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A0408
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier is a Philips group brand
Brisa
™
Linear Curve Surface Mount FC21LEC
Page 1 of 2 Wall/Ceiling Mounted T5 Fluorescent ADA Compliant
Features
1. Diffuser Holder: (2) Die-cast aluminum. One stationary and one spring
loaded for ease of diffuser removal and lamping.
2. Lamp Housing: Extruded aluminum.
3. Ballast Housing: (2) Die-cast aluminum.
5. Junction Box Mounting Plate: 18ga. C.R.S zinc plated. For mounting
to standard 4” octagonal junction box. Not required for conduit mounted
installations.
6. Backplate: 18ga. C.R.S. zinc plated. Provided with (2) 7/8” diameter conduit
knockouts (for non junction box installation) and (2) 3/16” diameter mounting
holes for direct mounting to wall or ceiling surface (hardware not provided).
7. Luminaire Ballast Disconnect: Meets NEC 410.130 (G) and CEC disconnect
requirements
8. Lampholder: Fluorescent- Mini Bi-Pin, G5 Base
9. Junction Box Cover: (2) Die-cast aluminum with integral spring clip for
easy snap-on installation (provided with luminaire). Not required for conduit
mounted installation.
10. Diffuser: Either 3mm curved opal acrylic or opal glass.
Electrical
11. Ballast
A. Electronic 120-277V
Voltage 120V 277V
Total Input Watts 30W 30.5W
Max. Line Current (Amps) 0.25A 0.11A
Power Factor 0.95 0.95
THD <20% <20%
Min. Starting Temp 50°F, 10°C 50°F, 10°C
Lamping (by others)
General Electric Osram/Sylvania Philips
(1) 14W T5 Linear Fluorescent
F21W/T5/*/ECO FP21/* F21T5/*/ALTO
*Manufactures Color Temperature Designation
Finish
Satin Aluminum
Labels
cULus Listed. Suitable for Damp Locations.
Fixture Ordering Information
Catalog No. Description Finish Wattage Volts Lamp Ballast (Eco-10)
FC21LEC1
Linear Curve Surface Mount Satin aluminum 21W 120V (1) T5 E3T521C1201
FC21LEC2
Linear Curve Surface Mount Satin aluminum 21W 277V (1) T5 E3T521C2771
Diffuser Ordering Information
Catalog No. Description Finish
Dimensions
(Nominal)
FCA1
Acrylic Curve Diffuser Opal 4" X 36"
FCG1
Glass Curve Diffuser
Cased Opal (Sandblasted Outside
Surface)
4" X 36"
3/16"
[ MOUNTING HOLE (x2)
10
1
2
3
4
9
8
7
6
5
7/8"
[ 22mm]KNOCKOUT (x2)
35 1/4"
[896mm]
4 3/16"
[107mm]
3 5/8"
[92mm]
3 1/4"
[82mm]
24"
[610mm]
9 7/8"
[250mm]
9 7/8"
[250mm]
10 3/4"
[273mm]
11 3/8"
[289mm]
6
11
4 1/8"
[104mm]
Backplate Detail
1 1/2" [38mm]