Instruction Manual

Page 2 of 3
AK SERIES ARCHITECTURAL REMOTE STATION
Version 0.1 OWNERS MANUAL 08/08/2011
www.lightronics.com
Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 tel [phone]
GENERAL OPERATION
No setup or turn on procedure is needed. When the
AR-1202 dimmer is powered on, the AK Series
remotes will also be powered.
If communication with the AR-1202 cannot be
established, a remote will appear to be repeatedly
scanning through all scenes.
MAINTENANCE AND REPAIR
TROUBLESHOOTING
1. Check cables and the connections at both ends.
2. If the unit is being used with a AR-1202 system -
ensure that one (and only one) of the AR-1202
dimmer(s) in the system is set to UNIT
ADDRESS 00
OWNER MAINTENANCE
There are no user serviceable parts in the unit. Service
by other than Lightronics authorized agents will void
your warranty.
OPERATING AND MAINTENANCE ASSISTANCE
Dealer and Lightronics Factory personnel can help you
with operation or maintenance problems. Please read
the applicable parts of this manual before calling for
assistance.
If service is required - contact the dealer from whom
you purchased the unit or contact the Lightronics,
Service Dept..
REMOTE COMMON
REMOTE DATA -
REMOTE DATA +
SHIELD
TO
AR-1202
AK-1005
Rear View
J101
CONNECTOR WIRING
AK
-
1003
AK
-
1002