Manual

ManualsBrandsLightronics ManualsLightingFXELP10 (during-after May 2009)

PROFILE SPOT575 OWNERS MANUAL Page 1 of 4

Ellipsoidal Lighting Fixture Version 20101007

INTRODUCTION

Thank you for purchasing the Profile Spot 575 lighting

fixture. This manual contains important information

about safe installation and use of this fixture. Please read

and follow these instructions carefully and keep this

manual for future reference.

The Profile Spot 575 is suitable for stage, disco, night club,

and other artistic applications.

The housing is a high quality aluminum alloy with an

insulating paint finish.

The

Profile Spot 575 includes a gel filter holder. A size

"B" gobo holder is also provided.

The product complies with CE norms and standards and is

certified to UL 1573 by MET Laboratories.

MODELS

The Profile Spot 575 is provided as one of five beam

width models (10º, 19º, 26º, 36º, and 50º).

Each model is available in either black or white color.

Lens tubes are interchangeable between models and are

marked with the beam width.

The 10º model has a larger lens tube which is

packaged separately from the main housing.

INSTALLATION

CAUTION RISK OF FIRE

The fixture must be located a minimum

of 1.5 meters from flammable objects.

The fixture is for

INDOOR USE ONLY. Use only in dry

locations. Keep this device away from moisture,

excessive heat, humidity, and dust.

The fixture must be installed in a location with

adequate ventilation, at least 1.5 meters from adjacent

surfaces. Do not allow vent holes to be blocked.

Use a safety cable when installing this fixture. They

are inexpensive and easy to use.

LENS TUBE

BARREL

REFLECTOR

HOUSING

LAMP HOUSING

OKE

POWER

CABLE

"B" GOBO HOLDER

5.375"

GEL HOLDER

FOCUS KNOB

Summary of content (4 pages)

PAGE 1
PROFILE SPOT575 Ellipsoidal Lighting Fixture OWNERS MANUAL Page 1 of 4 Version 20101007 INTRODUCTION Thank you for purchasing the Profile Spot 575 lighting fixture. This manual contains important information about safe installation and use of this fixture. Please read and follow these instructions carefully and keep this manual for future reference. The Profile Spot 575 is suitable for stage, disco, night club, and other artistic applications.
PAGE 2
PROFILE SPOT575 Ellipsoidal Lighting Fixture OWNERS MANUAL POWER CONNECTIONS DANGER RISK OF ELECTRIC SHOCK The fixture must be correctly grounded and must be installed to comply with all applicable regulations. The unit is supplied with a power cable and may be provided with a power cable connector. The two wires with WHITE SLEEVING are for the HOT (Power) and the NEUTRAL. The GREEN / YELLOW conductor in the power cable is connected to the fixture case as a safety ground.
PAGE 3
PROFILE SPOT575 Ellipsoidal Lighting Fixture OWNERS MANUAL To ensure the reliability of the fixture it should be regularly cleaned and inspected. Page 3 of 4 Version 20101007 TECHNICAL SPECIFICATIONS The vent slots should be cleaned monthly. The fixture interior should be cleaned annually using a vacuum cleaner or air jet. The objective lens may require weekly cleaning depending on the operating environment. Power Supply: 120VAC, 60 Hz Lamp: OSRAM GLA/575 or GLE/750 (G9.
PAGE 4
WARRANTY This product is warranted for a period of TWO YEARS from the date of purchase against defects in materials and workmanship. This warranty is subject to the following restrictions and conditions: A) If service is required, you may be asked to provide proof of purchase from an authorized Lightronics dealer. B) This warranty is valid only for the original purchaser of the unit.