Manual

ManualsBrandsLightronics ManualsLightingPAR4

PAR

OWNERS MANUAL Page 1 of 4

MULTIPLE LENS PAR FIXTURE Version 20100224

INTRODUCTION

Thank you for purchasing the PAR

lighting fixture.

This manual contains important information about safe

installation and use of this fixture. Please read and

follow these instructions carefully and keep this

manual for future reference.

The PAR

is suitable for stage, disco, night club, and

other artistic applications.

The housing is a high quality aluminum alloy with an

insulating paint finish.

The PAR

includes a lens rotation ring to enable beam

adjustments. A gel filter holder is also provided. The

product complies with CE norms and standards.

The fixture is supplied with four interchangeable high

quality lenses to cover various lighting applications.

SAFE USAGE

Disconnect the fixture from the power when it is not in

use, before cleaning it, or before any maintenance.

The fixture must be located a minimum of 1.5 meters

from flammable materials.

Do not touch any part if the fixture during operation.

It can operate at temperatures which can cause severe

burns.

Avoid direct exposure to the light from the lamp. The

light can be bright enough to harm the eye.

Keep the lamp and lens clean. Do not touch the lamp

glass and lens with bare hands.

Do not operate the lamp unless the lamp holder is

installed in the fixture.

Replace the lamp if it becomes damaged or deformed.

Replace the lens if it becomes cracked or scratched.

Do not project the beam onto nearby flammable

surfaces. The minimum distance is 5 meters.

VNS Very Narrow Spot

NS Narrow Spot

MF Medium Flood WF Wide Flood

Clear Lens

rox. 15º Beam

Diffused Lens

rox. 19º Beam

Oval Beam

rox. 20º X 35º

Oval Beam

rox. 30º X 50º

Summary of content (4 pages)

PAGE 1
PAR4 MULTIPLE LENS PAR FIXTURE OWNERS MANUAL Page 1 of 4 Version 20100224 INTRODUCTION Thank you for purchasing the PAR4 lighting fixture. This manual contains important information about safe installation and use of this fixture. Please read and follow these instructions carefully and keep this manual for future reference. The PAR4 includes a lens rotation ring to enable beam adjustments. A gel filter holder is also provided. The product complies with CE norms and standards.
PAGE 2
PAR4 MULTIPLE LENS PAR FIXTURE INSTRUCTION MANUAL Page 2 of 4 Version 20100224 INSTALLATION Disconnect all power from the fixture. MOUNTING Allow the fixture to cool off before proceeding. CAUTION RISK OF FIRE The fixture must be located a minimum of 1.5 meters from flammable objects. Make sure that all power is disconnected from the fixture before proceeding. The fixture is for INDOOR USE ONLY. Use only in dry locations. Keep this device away from moisture, excessive heat, humidity and dust.
PAGE 3
PAR4 MULTIPLE LENS PAR FIXTURE INSTRUCTION MANUAL LENS REMOVAL 1. Place the fixture on a horizontal surface with the lens down. 2. Turn the lens rotation ring until the metal release tab is 90º away from the gel retaining clip on the housing. 3. Hold one hand under the lens and press the metal release tab to release it. Allow the lens to carefully drop out of the fixture. LENS INSTALLATION 1. Place the fixture on a horizontal surface. 2.
PAGE 4
WARRANTY This product is warranted for a period of TWO YEARS from the date of purchase against defects in materials and workmanship. This warranty is subject to the following restrictions and conditions: A) If service is required, you may be asked to provide proof of purchase from an authorized Lightronics dealer. B) This warranty is valid only for the original purchaser of the unit.