SM - 192 DMX LIGHTING CONTROLLER OWNERS MANUAL May 19, 2009 www.lightronics.com Lightronics Inc.
INSTRUCTION MANUAL SM - 192 DMX LIGHTING CONTROLLER Page 2 of 8 Version 20090519 MAIN FEATURES FIXTURE FUNCTIONS 192 DMX Channels 30 Scene Banks of 8 programmable scenes each 6 Programmable chases with up to 240 steps each 8 Faders for output level adjustment Built-in microphone for Music Auto-Run AUTO mode controlled by TAP SYNC and SPEED MIDI control through MIDI interface 4 digit LED display Blackout Function Fade Time control Power Input: +9 - +12VDC, 300mA minimum Power Connector: 2.
INSTRUCTION MANUAL SM - 192 DMX LIGHTING CONTROLLER (1) FIXTURE SELECTORS 5 Page 3 of 8 Version 20090519 10 16 8 9 (2) SCENE SELECTORS 101 SM 192 (3) CHANNEL FADERS CONTROLS & FUNCTIONS 4 6 7 11 12 14 13 15 9 Chase Selectors: Selects a chase for programming 1 Fixture (Scanners) Selectors: Used to select one or more of the 12 fixtures which can be controlled by the SM-192. Each fixture is a block of 16 DMX channels.
INSTRUCTION MANUAL SM - 192 DMX LIGHTING CONTROLLER BANK COPY: Copies the contents of a scene bank to another bank in program mode. 14 TAPSYNC/DISPLAY: TAPSYNC: Controls speed of scenes or chases. Tap it several times at the rate you want the chase or scenes to run at. This as an alternative to using the SPEED Fader. The display shows the results (in seconds) when this button is used. DISPLAY: Switches the display between STEP and BANK.
INSTRUCTION MANUAL SM - 192 DMX LIGHTING CONTROLLER Page 5 of 9 Version 20090519 EDIT A SCENE COPY A BANK OF SCENES 1. Select desired bank to store the scene in using BANK UP or BANK DOWN. This will copy the entire contents of a scene bank to another bank. 2 Select desired scene within the bank by pushing its SCENES button (1 - 8). 1. Select the bank you want to copy FROM using BANK UP or BANK DOWN. 3. Select the fixture(s) to be affected by pushing the associated SCANNERS buttons. 2.
INSTRUCTION MANUAL SM - 192 DMX LIGHTING CONTROLLER Page 6 of 9 Version 20090519 PROGRAMMING CHASES INSERT A STEP INTO A CHASE The SM-192 contains 6 user programmable chases. Each chase may include up to 240 steps. 1. Select a chase (1 - 6) by pushing the applicable CHASE button. EACH CHASE STEP CONSISTS OF A SCENE WHICH HAS ALREADY BEEN RECORDED. 2. Push TAPSYNC/DISPLAY. The display will show the current chase and step. A chase step can use any scene in any bank.
INSTRUCTION MANUAL SM - 192 DMX LIGHTING CONTROLLER OPERATING SCENES When the SM-192 is turned on it is in the manual scene mode with bank 1 scene 1 active. ACTIVATE A SCENE MANUALLY 1. Turn off PROGRAM mode, AUTO, MUSIC, and all chases. 2. Select the desired scene bank using BANK UP or BANK DOWN. 3. Push the SCENES button for the scene you want to activate. RUN A BANK OF SCENES AUTOMATICALLY The scene Auto-Run function will cycle through a bank of scenes continuously.
INSTRUCTION MANUAL SM - 192 DMX LIGHTING CONTROLLER CHASE MUSIC AUTO-RUN The SM-192 has an internal microphone which can be used to Auto-Run chases with music synchronization. 1. Select a chase (1 - 6) by pushing the applicable CHASE button. You can select more than one. 2. Push MUSIC/BANK COPY. The MUSIC TRIGGER indicator on the display will light. and Music Auto-Run will begin. 3. Push AUTO/DEL to stop chase music Auto-Run. The display indicator in the display will go OFF.
WARRANTY All products are warranted for a period of TWO YEARS from the date of purchase against defects in materials and workmanship. This warranty is subject to the following restrictions and conditions: A) If service is required, you may be asked to provide proof of purchase from an authorized Lightronics dealer. B) This warranty is valid only for the original purchaser of the unit.
www.lightronics.com Lightronics Inc.
