User's Manual

SET-UP & DAILY OPERATION

Operating the Flexmike

Once the Flexmike is charged, follow these steps for use.

1. Remove the Flexmike from the charger and put it on by connecting the

magnetic clasps behind your neck. Adjust the lanyard so that the top of the

Flexmike aligns with the collarbone.

2. The Flexmike will automatically power on and mute when it is removed

from the charger.

3. The microphone volume on the Flexmike is set at the factory to the

midpoint. It is adjusted by the up/ down buttons on the side of the mic.

4. While speaking in a normal voice, fine tune the microphone volume.

Proper volume level should be as follows:

• Your voice should be clearly heard by another person on the other side

of the room.

• You should barely be able to hear your own voice.

• There should not be any audio “feedback” or squealing outside of 2-3

feet (if there is, turn the volume down slightly).

REMEMBER: This equipment supplements the user’s voice so they are able

to speak in a conversational tone. Having the volume set too high will result in

feedback and listener fatigue.

• Once initial volume level is set, walk around the room and listen for overall

audio quality.

• If further fine tuning is required, you may need to adjust the Tone Control on

the front of the 975.

Audio

Input

Audio

Output

Audio

Output

Tone

Level

Push

StatusPower

Set-Up & Daily Operation

SET-UP

FLEXMIKE

VOLUME

CONTROL

ALIGN WITH

COLLARBONE

975 TONE CONTROL