User's Manual

11
Charging the Flexmike
BEFORE USE, THE FLEXMIKE SHOULD BE CHARGED
It will take 5-6 hours for the Flexmike to obtain a full charge. A fully charged
Flexmike will last for up to 8 hours of use. If microphones are used daily, they
should be charged each night.
Replacement lithium polymer battery packs may only be purchased through
Lightspeed Technologies (part # 77-L3.7V). Do not attempt to charge with other
battery packs. They can overheat and expand creating a significant hazard and
damaging the microphone (this is not covered by warranty).
ATTACH LANYARD
Hang the Flexmike on the lanyard opposite
the magnetic clasp.
CONNECT CRADLE CHARGER
Plug power cord into the cradle charger and
then plug the AC end into an electrical outlet.
CHARGE FLEXMIKE
Place the Flexmike into the cradle.
The LED on the Flexmike power light will glow
red indicating charging has started.
It takes about 5.5 hours to fully charge the
Flexmike battery. When charging is complete,
the power status light will glow green.
CHARGING IN PROGRESS
CHARGING COMPLETE
SET-UP & DAILY OPERATION