User's Manual
13
Output Audio to Personal Assistive Listening Device (ALD)
1. Press the Audio Output Selector first, then turn the volume control on the
front panel all the way down (fully counterclockwise).
2. Determine the type of audio input jack on the ALD as manufacturers’
products dier in connector size and shape. Many require a 3.5 mm to
3.5 mm patch cable (part# MSC3535, not included).
3. Connect a patch cable from the ALD microphone jack or AUX input to
AUDIO OUT jack on the front of the 975.
4. With the 975 and ALD turned on, speak into the Flexmike and slowly adjust
the corresponding volume control on the 975 until the appropriate audio
level is obtained in the ALD.
5. It may be necessary to adjust the volume on the ALD to achieve
appropriate volume level.
Audio
Input
Audio
Output
Audio
Output
Tone
Level
Push
StatusPower
AUDIO
OUTPUT
SET-UP & DAILY OPERATION
VOLUME
CONTROL
AUDIO OUT
SELECTOR