User's Manual

15
Daily Operation Instructions
1. AT THE START OF THE DAY, REMOVE FLEMIKE FROM THE CHARGER
• The microphone will default to the Mute position, the status light will
turn to white.
• Place the microphone around your neck.
• Press the power/mute button. The light will turn blue, indicating the
microphone is active and ready to use.
• Adjust volume with the UP/DOWN buttons if necessary.
• If Flexmike needs to be powered down for some time, press and hold the
power button. To power Flexmike again, press and hold the power button
until the blue light begins to blink.
2. PRIVATE CONVERSATIONS
• Mute the Flexmike during private conversations by momentarily pressing
the power button. When muted, the blue light turns white.
• When conversation is over, momentarily press the power button again to
unmute the Flexmike.
3. END OF DAY
• Place the Flexmike into the cradle charger and make sure the Power
Supply is plugged in to an electrical outlet.
• The Flexmike will stay powered on during charging, but will automatically
be muted.
• It is not necessary to turn o the 975 at end of day, but you may do so by
pressing the power button on the front panel.
• If you do want to power it down, when Flexmike is removed from charging
the next day, it will automatically power the 975 on.
Audio
Input
Audio
Output
Audio
Output
Tone
Level
Push
StatusPower
POWER
STATUS
LIGHT
POWER
BUTTON
POWER / MUTE BUTTON
& STATUS LIGHT
VOLUME
CONTROL
SET-UP & DAILY OPERATION