User's Manual

13
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
2. PLUG IN THE CHARGING STATION &
REDCAT ACCESS SPEAKER
1. Locate the two 16V power supplies and power cables -- one each for the
charging station and Redcat Access.
2. Connect the AC power cords into the DC power supplies.
3. Using the first power supply, insert the DC connector into the “DC POWER”
jack on the charging station.
4. Plug the AC power cord into an electrical outlet.
5. The blue power light on the charging station will glow to indicate it is ready
to begin charging components.
Power On
SPEAKER
VOLUME
OUT IN
AUDIO
SPEAKER
OUTPUT
CHARGE OUT
16V/0.3A
DC POWER
16V/2.0A
REGISTER
AUDIO IN
MIN
MAX
AUDIO
(ALD) OUT
MIN
MAX
ON/OFF
DC INPUT
16V/2.0A
6. Using the second power supply, insert the DC
connector into the “DC INPUT” jack on the
Redcat Access.
7. Plug the AC power cord into an electrical outlet.
8. The Redcat Access automatically powers on and
the blue power light on the front panel will glow.