User's Manual
19
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
2. Remove the Flexmike from the charger
and put on.
• The microphone will default to the Mute
position, the microphone status light will
turn to red.
• Place the microphone around your neck
and insert the earbud.
• Press the power/mute button. The
microphone status light will turn blue,
indicating the microphone is active.
SECTION 3:
DAILY OPERATION
INSTRUCTIONS
1. Remove the pods from the charger and place them on the group
tables.
• The speaker pods will stay powered on while charging when the switch
is left in the on position.
• Note the location of the pod numbers.
Vol
Vol
Mute
6
5
1
3
2
4
UP DN
Power /
Mute
3. Remove the remote and begin instruction. Use the remote to:
• Address the whole class
• Instruct small groups
• Redirect small groups
• Monitor (listen only) small groups
• Activate student group sharing
• Adjust earbud volume