User's Manual

28
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
BATTERY REPLACEMENT CONT’D
Replacement of battery pack in
remote
1. Use a screwdriver to remove the
screw and the slide the battery
door open.
2. Disconnect the cable and slide
the battery pack out.
3. Take the new battery pack,
connect the cable as shown and
insert the battery pack into the
compartment.
4. Slide the cover back on and
tighten the screw to secure the
door.
5. Place the remote in the charging
station to fully charge the new
battery pack.
6. The charging light will turn red.
It will turn green when fully
charged (up to 10 hours).
REG