User's Manual

8
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
REDCAT SPEAKER CONTROLS,
CONNECTIONS AND INDICATORS CON’T
5. REGISTRATION: Press this button if
there is a new microphone, pod, or
remote to be registered.
6. AUDIO INPUT JACK & VOLUME
CONTROL: 3.5mm stereo connector
for connecting multimedia sources
to the Redcat Access. Controls the
volume level of the audio input from
the connected audio source.
7. AUDIO OUTPUT JACK & VOLUME
CONTROL: 3.5mm stereo connector
for connecting to an assisted listening
device (ALD) or to a computer for
recording. Controls the volume level
of the audio output.
8. POWER BUTTON: This button is used
to turn the Redcat Access on or off.
The blue front panel will glow when
power is on.
9. POWER INPUT JACK: Plug the power
supply (16VDC/2.0A) into this jack.
REGISTER
AUDIO IN
MIN
MAX
AUDIO
(ALD) OUT
MIN
MAX
ON/OFF
DC INPUT
16V/2.0A
(SIDE VIEW)
10. CARRYING INSET: Cutaway grip for moving or carrying
the Redcat.
11. CABLE MANAGEMENT AND STRAIN RELIEF
12. WALL MOUNTING SLOTS
13. SECURITY BRACKET SLOT
Testing Purposes Only
5
6
7
8
9
(REAR VIEW)
10
11
12
13