User's Manual

13
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
2B. USING MORE THAN ONE DELTA PA
RECEIVER
If you have a second Delta PA:
A) Verify that RECVR 1
transmitter and receiver are ON
and set to the same clear channel.
B) Make sure the transmitter for
RECVR 2 is turned OFF.
C) Press the SCAN button on the
RECVR 2 receiver.
D) After the RECVR 2 receiver
selects a clear channel, set
the RECVR 2 transmitter (handheld
or belt-pack) to the selected
channel. See pages 11 and 16 for
instructions.
3. Manual Channel Selection:
A) Pressing the UP CHANNEL
button increases the channel
number by one.
B) Pressing the DOWN CHANNEL
button decreases the channel
number by one.
C) Once a frequency is selected,
you will need to select the same
channel on the corresponding
transmitter (handheld or belt-
pack). See pages 11 and 16 for
instructions.
4. Set the Receiver 1 and Receiver
2 channels to be the same as the
first Delta PA.
ON
Channel 2