User's Manual

19
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
8. CHANNEL SELECTION: BELT-PACK
TRANSMITTER
Channel Selection:
Once a channel has been selected on
the receiver, you now need to select
that same channel on the Belt-pack
transmitter.
1. Turn the transmitter power ON by
sliding the PWR button to ON.
2. Open the battery compartment
door by depressing the latches on
each side of the transmitter.
3. Use the screwdriver channel set
to switch to the current channel
shown on the receiver.
Transmitters and receivers are
available in 3 different frequency
groups (620, 645, 670 MHz). Verify that
the frequency group of the receiver
matches the letter code on the silver
sticker in the battery compartment of
the transmitter.
Model Number: BP016
Serial Number
BP01614324024
FREQUENCY 670 MADE IN TAIWAN