User Manual
Table Of Contents
- U s e r M a n u a l
- SYSTEM COMPONENTS AND UNPACKING
- OPTIONAL COMPONENTS
- POD CONTROLS AND CONNECTIONS
- ACTIVATE STATION: CONTROLS, CONNECTIONS AND INDICATORS
- ACTIVATE STATION: CONTROLS, CONNECTIONS AND INDICATORS
- 2. PLUG IN THE ACTIVATE STATION
- 3. PLACE THE COMPONENTS IN THE ACTIVATE STATION
- 5. REGISTER ANY NEW ACTIVATE SYSTEM COMPONENTS
- 6. DOWNLOAD THE MOBILE APP
- 7. PAIR YOUR MOBILE DEVICE TO ACTIVATE STATION
- 8. SET UP THE FLEXMIKE + EARBUD
- 9. SET THE PODS OUT IN THE CLASSROOM
- 10. TEST GENERAL SYSTEM OPERATION
- 9. SETTING SYSTEM VOLUME LEVELS
- DAILY OPERATION INSTRUCTIONS
- ADDITIONAL OPERATION INFORMATION
- MAINTENANCE & TROUBLESHOOTING
- WARRANTY, SAFETY & SPECIFICATIONS
SECTION 2:
INITIAL SET-UP
1.
DETERMINE SET-UP LOCATION
Activate Station:
The Activate Station charges and organizes and charges the pods and
microphone(s) and also wirelessly connects audio to the classroom audio system
and your mobile device. Set it up in a convenient place near a power source that
is highly accessible for both teachers and students. If plugging in multimedia
audio sources, it should be located in close proximity to minimize cable runs.
Key considerations:
•
Close proximity to AC power outlet
•
Accessible for daily charging of all components
•
Near multimedia audio sources if desired
•
Do not place in a fully enclosed metal cabinet
Pods
The pods are designed to be highly portable and move around the room with
the student group. For optimum audio quality, they should be placed in the
center of a table or group. Pods can be taken out of the room up to about 100
feet before communication is lost.
NEW DIAGRAM REQUIRED
Charging
Station
Speaker Pods
6.
Safety
&
Specifications
5.
Maintenance
&
T
r
oubleshooting
4.
Additional
Information
3.
DaiIy
Operation
1.
Overview
2.
Initial
Set-up