User Manual
Table Of Contents
- U s e r M a n u a l
- SYSTEM COMPONENTS AND UNPACKING
- OPTIONAL COMPONENTS
- POD CONTROLS AND CONNECTIONS
- ACTIVATE STATION: CONTROLS, CONNECTIONS AND INDICATORS
- ACTIVATE STATION: CONTROLS, CONNECTIONS AND INDICATORS
- 2. PLUG IN THE ACTIVATE STATION
- 3. PLACE THE COMPONENTS IN THE ACTIVATE STATION
- 5. REGISTER ANY NEW ACTIVATE SYSTEM COMPONENTS
- 6. DOWNLOAD THE MOBILE APP
- 7. PAIR YOUR MOBILE DEVICE TO ACTIVATE STATION
- 8. SET UP THE FLEXMIKE + EARBUD
- 9. SET THE PODS OUT IN THE CLASSROOM
- 10. TEST GENERAL SYSTEM OPERATION
- 9. SETTING SYSTEM VOLUME LEVELS
- DAILY OPERATION INSTRUCTIONS
- ADDITIONAL OPERATION INFORMATION
- MAINTENANCE & TROUBLESHOOTING
- WARRANTY, SAFETY & SPECIFICATIONS
SECTION 3:
DAILY OPERATION
INSTRUCTIONS
1.
Remove the Flexmike from the charger and put on.
2.
Remove the pods from Activate Station and place them on the group
tables.
•
Note the location of the pod numbers.
Power /
Mute
•
The microphone will default to the Mute
position, t
he microphone status light will
turn to red.
•
Place the microphone around your neck
and insert t
he earbud.
•
Press the power/mute button. The
microphone s
tatus light will turn blue,
indicating the microphone is active.
3.
Open the Lightspeed Activate app on your mobile device and begin
i
nstruction. Use the app to:
•
Address the whole class
•
Monitor and Instruct small groups
•
Activate student group sharing
•
Capture an audio/video recording
•
Take classroom photos
•
Adjust volume levels
6.
Safety
&
Specifications
5.
Maintenance
&
T
r
oubleshooting
4.
Additional
Information
2.
Initial
Set-up
1.
Overview
3.
DaiIy
Operation