User's Manual
19
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
• The microphone will default to the Mute
position, the microphone status light will
turn to red.
• Place the microphone around your neck
and insert the earbud.
• Press the power/mute button. The
microphone status light will turn blue,
indicating the microphone is active.
SECTION 3:
DAILY OPERATION
INSTRUCTIONS
1. Remove the Flexmike from the charger and put on.
2. Remove the pods from Activate Station and place them on the group
tables.
• Note the location of the pod numbers.
Power /
Mute
3. Open the Lightspeed Activate app on your mobile device and begin
instruction. Use the app to:
• Address the whole class
• Monitor and Instruct small groups
• Activate student group sharing
• Capture an audio/video recording
• Take classroom photos
• Adjust volume levels