User's Manual

1. Overview 2. Setup & Use

3. Optional

Accessories

4. Troubleshooting

5. Warranty, Safety

& Speciﬁcations

1B. TO SET-UP MOUNTED ON A WALL CONT’D

1. Level template and tape to wall

2. Mark position of drill holes on wall

3. Drill pilot holes

4. Insert anchors

5. Remove feet from Redcat Access and place over anchors

6. Insert and secure screws through the Redcat Access feet into the

anchors

7. If using optional security bracket, mount on wall using the

provided screws and anchors

8. Slide the Redcat Access onto the wall mounted feet