User's Manual

17
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
1. Turn the ALD (Assistive Listening
Device) volume control on
the Redcat Access side panel
counterclockwise all way the down.
2. Determine the size and type of
audio input jack on the device as
many manufacturers’ products
differ in connector size and shape.
The Lightspeed 370 Transmitter
requires a 3.5mm to 3.5mm
patch cable (part# MMC3535, not
included).
3. Connect a patch cable from the
ALD’s microphone jack or AUX
input to the 3.5mm audio jack
labeled “ALD OUT” on the side
of the Redcat Access.
4. With the Redcat Access and ALD
turned on, speak into the Flexmike
and slowly adjust the ALD volume
control until the appropriate
audio level is attained in the ALD’s
receiver headphones.
5. It may be necessary to adjust
the volume on the Personal FM
receiver to achieve appropriate
volume level.
6. OUTPUT TO ASSISTIVE LISTENING
DEVICE (ALD)
REGISTER
AUDIO IN
MIN
MAX
AUDIO
(ALD) OUT
MIN
MAX
ON/OFF
DC INPUT
16V/2.0A