User's Manual

8
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
SIDE PANEL CONTROLS AND
CONNECTIONS
1. REGISTRATION: Press this button
if there is a new microphone to be
registered.
2. AUDIO INPUT VOLUME CONTROL
& INPUT JACK: 3.5mm stereo
connector for connecting
classroom audio sources to the
Redcat Access. Controls the
volume level of the audio input
from the connected audio source.
3. AUDIO OUTPUT VOLUME CONTROL
& OUTPUT JACK: 3.5mm stereo
connector for connecting to an
assisted listening device (ALD)
or to a computer for recording.
Controls the volume level of the
audio output.
4. POWER SWITCH: This switch is used
to turn the Redcat Access on or
off. The front panel blue LED lights
when power is on.
5. DC POWER INPUT JACK: Plug the
power supply (16V/2.0A) into this
jack.
REGISTER
AUDIO IN
MIN
MAX
AUDIO
(ALD) OUT
MIN
MAX
ON/OFF
DC INPUT
16V/2.0A
2
1
4
5
3
REAR PANEL FEATURES
1. CARRYING INSET: Cutaway grip for moving or carrying
the Redcat Access.
2. CABLE MANAGEMENT AND STRAIN RELIEF
3. WALL MOUNTING SLOTS
4. SECURITY BRACKET SLOT
Testing Purposes Only
1
2
3
4