User's Manual

15
1. Overview 2. Daily Operation
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
1. The microphone will default to the Mute position, the
status will turn to red.
2. Place the microphone around your neck.
3. Press the power/mute button, the status will turn blue,
indicating the microphone is active and ready to use.
4. Adjust volume with the UP/DOWN buttons if necessary.
5. If Flexmike needs to be powered down for some time,
press and hold the power button. To power Flexmike
again, press and hold the power button until the blue light
begins to blink.
Power /
Mute
2. AT START OF DAY, UNPLUG THE
MICROPHONE FROM THE CHARGING
CABLE AND PUT ON
3. PRIVATE CONVERSATIONS
1. Mute the Flexmike during private conversations by
momentarily pressing the power button. When muted, the
blue light turns red.
2. When conversation is over, momentarily press the power
button again to unmute the Flexmike.
4. END OF DAY
1. Remove the Flexmike from around your neck.
2. Plug the Flexmike into the charging cable and ensure the
wall charger is plugged in to an outlet.
3. The Flexmike will stay powered on during charging, but will
automatically be muted.
4. It is not necessary to turn off Topcat If you do want to
power it down, press the power button on the Media
Connector after plugging in the Flexmike to charge. If
Topcat is powered down, then when Flexmike is removed
from charging the next day, it will automatically power the
Topcat and Media Connector on.