User's Manual

36
1. Overview 2. Installation
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
IR SENSOR/RECEIVER (ISR) INSTALLATION
CONT’D
1. Attach the bracket to the ceiling
tile grid (t-bar).
a. Slide the tabs onto the outsides
of the t-bar, starting with one
corner.
b. Attach the second tab around
the other side of the t-bar.
c. Repeat with the other side of
the bracket so it is connected
at all four points.
2. Slide the ISR onto the bracket until
it “clicks” into place.
a. Guide the mounting rails
onto the bracket, oriented as
pictured.
b. Once secure the ISR locks into
place.
c. To remove the ISR, press the
release bar down and slide the
ISR off the bracket.
Suspended Ceiling Mount
clip connects to t-bar on ceiling
Release Bar