705iR 705iR PORTABLE INFRARED WIRELESS AMPLIFICATION SYSTEM L I G H T S P E E D TE C H N O L O G I E S , 11509 SW TU A L AT I N , HERMAN OR INC. RD 97062 800.732.8999 WWW.LIGHTSPEED-TEK.
User Notes Table of Contents Record your system serial numbers and purchase information. This is helpful when ordering additional components, accessories, and/or warranty service.
Quick-start Guide: Simply follow the six steps on this page to get your 705iR up and running in a matter of minutes! To take full advantage of the features the The LightSPEED 705iR Portable Infrared Wireless Amplification System is warranteed against malfunction due to defects in materials and 705iR has to offer, as well as its applica- workmanship for a period of five years beginning at tions, please take time to read through the date of the purchase. Batteries and the optional the entire manual.
Individual Components and Optional Accessories LES-LT70: LightMic Rechargeable Microphone/Transmitter with lavaliere cord, batteries and charging cable LES-HM70: Handheld Microphone/Transmitter with batteries and charging cable BA-NH1: Rechargeable AA Battery (Nickel Metal Hydride) AC-TCC7: Charging Cable for LT-70 and HM-70 to be used with 705iR [13] AC-LTCB: Lavaliere cord for LT-70 PS-16V-2.
Overview Top Panel Controls The 705iR is a lightweight, multipurpose, portable amplification system powered by rechargeable batteries or AC power. It is designed to allow teachers to speak in normal conversational tones and yet be heard clearly by every student in the classroom. 1. CH A POWER: This knob turns on the power for the 705iR and controls the Channel A volume. We recommend using Channel A if you are using a single microphone for your system. Turn the knob clockwise to increase volume.
Tips on Using Classroom Amplification Top Panel Controls (cont.) 4. BASS: This knob controls the lowfrequency sound of the 705iR. These helpful suggestions are provided to maximize the successful use of your new 705iR Portable Infrared Wireless Amplification System. • Speak in a natural voice. A normal conversational speech level will provide an adequate signal.
LT-70 LightMic™ Transmitter Controls and Connections Optional HM-70 Handheld Microphone Operating Instructions Microphone Rechargeable batteries are pre-installed. External Microphone Connector 4 5 Charging Connector 1. ON/OFF SWITCH: This switch, located on the side of the LightMic, turns the unit on or off. The red triangle-shaped LED on the front of the LightMic will light when power is on. 2. CHANNEL SELECT SWITCH: This switch allows for selection between Channel A or B.
Optional HM-70 Handheld Microphone Optional HM-70 Handheld Microphone Controls The HM-70 handheld microphone is an optional microphone that can be ordered from LightSPEED. It can be used alone or in tandem with the LT-70 LightMic. 1. POWER SWITCH: This 3-position switch allows you to turn the microphone on (up position), mute the microphone (middle position), and turn off the microphone (down position). The red LED above the switch lights when the switch is in the “MUTE” or power “ON” positions.
LT-70 LightMic™ Transmitter/Microphone Operating the LightMic a. The LightMic has a built-in microphone. Once the transmitter is switched on, the microphone is activated. The rechargeable NiMH batteries must be fully charged before regular classroom operations. b. The LightMic may be used as a handheld mic or a hands-free pendent style microphone by clipping the LightMic on the supplied lavaliere cord.
LT-70 LightMic™ Transmitter/Microphone Operating the LightMic a. The LightMic has a built-in microphone. Once the transmitter is switched on, the microphone is activated. The rechargeable NiMH batteries must be fully charged before regular classroom operations. b. The LightMic may be used as a handheld mic or a hands-free pendent style microphone by clipping the LightMic on the supplied lavaliere cord.
Optional HM-70 Handheld Microphone Optional HM-70 Handheld Microphone Controls The HM-70 handheld microphone is an optional microphone that can be ordered from LightSPEED. It can be used alone or in tandem with the LT-70 LightMic. 1. POWER SWITCH: This 3-position switch allows you to turn the microphone on (up position), mute the microphone (middle position), and turn off the microphone (down position). The red LED above the switch lights when the switch is in the “MUTE” or power “ON” positions.
LT-70 LightMic™ Transmitter Controls and Connections Optional HM-70 Handheld Microphone Operating Instructions Microphone Rechargeable batteries are pre-installed. External Microphone Connector 4 5 Charging Connector 1. ON/OFF SWITCH: This switch, located on the side of the LightMic, turns the unit on or off. The red triangle-shaped LED on the front of the LightMic will light when power is on. 2. CHANNEL SELECT SWITCH: This switch allows for selection between Channel A or B.
Tips on Using Classroom Amplification Top Panel Controls (cont.) 4. BASS: This knob controls the lowfrequency sound of the 705iR. These helpful suggestions are provided to maximize the successful use of your new 705iR Portable Infrared Wireless Amplification System. • Speak in a natural voice. A normal conversational speech level will provide an adequate signal.
Overview Top Panel Controls The 705iR is a lightweight, multipurpose, portable amplification system powered by rechargeable batteries or AC power. It is designed to allow teachers to speak in normal conversational tones and yet be heard clearly by every student in the classroom. 1. CH A POWER: This knob turns on the power for the 705iR and controls the Channel A volume. We recommend using Channel A if you are using a single microphone for your system. Turn the knob clockwise to increase volume.
Individual Components and Optional Accessories LES-LT70: LightMic Rechargeable Microphone/Transmitter with lavaliere cord, batteries and charging cable LES-HM70: Handheld Microphone/Transmitter with batteries and charging cable BA-NH1: Rechargeable AA Battery (Nickel Metal Hydride) AC-TCC7: Charging Cable for LT-70 and HM-70 to be used with 705iR [13] AC-LTCB: Lavaliere cord for LT-70 PS-16V-2.
Quick-start Guide: Simply follow the six steps on this page to get your 705iR up and running in a matter of minutes! To take full advantage of the features the The LightSPEED 705iR Portable Infrared Wireless Amplification System is warranteed against malfunction due to defects in materials and 705iR has to offer, as well as its applica- workmanship for a period of five years beginning at tions, please take time to read through the date of the purchase. Batteries and the optional the entire manual.
User Notes Table of Contents Record your system serial numbers and purchase information. This is helpful when ordering additional components, accessories, and/or warranty service.
705iR 705iR PORTABLE INFRARED WIRELESS AMPLIFICATION SYSTEM L I G H T S P E E D TE C H N O L O G I E S , 11509 SW TU A L AT I N , HERMAN OR INC. RD 97062 800.732.8999 WWW.LIGHTSPEED-TEK.