User's Manual

ManualsBrandsLightwave Communications ManualsserversLightwave Communications Lightwave Communications Server 3200

1 will refer to the netterm subsystem and

2 will refer to the network subsystem on the card

F1 - G1 switch cards (do not require updating)

H1 - O1 device cards

P1 - control card

LINESPERPAGE [n] - Display/set number of lines before pause

(n can be 0 to 99, 0 disables)

LISTCARDS - Show list of installed cards

LISTDEVICES - Show list of device names

LISTUSERS [user id|/ALL] - Display list of users

LOG [/ENABLE|DISABLE]

- Enable/disable system events

and set destination of event info

LOGOUT,LOGOFF - Logout

MODEM [/DEFAULT] - Display/set modem init string

/DEFAULT - set init string to default

MODEMTIMEOUT [t] - Display/set timeout for modem calls

(t can be 0 to 30 minutes, 0 disables)

NETWORK [/ALL|slot letter] - Set network parameters ('B' - 'E')

POWERSTATUS - Show status of power supplies

PROMPT [/CLEAR|/DEFAULT] - Set/clear system prompt for logged-out state.

or set prompt to factory default.

MODEM [/DEFAULT] - Display/set modem init string

/DEFAULT - set init string to default

MODEMTIMEOUT [t] - Display/set timeout for modem calls

(t can be 0 to 30 minutes, 0 disables)

NETWORK [/ALL|slot letter] - Set network parameters ('B' - 'E')

POWERSTATUS - Show status of power supplies

PROMPT [/CLEAR|/DEFAULT] - Set/clear system prompt for logged-out state.

or set prompt to factory default.

RESTORE - Restore internal database

(upload ASCII file)

TELNETTIMEOUT [t] - Display/set timeout for telnet sessions

(t can be 0 to 30 minutes, 0 disables)

TERMINALS - Display terminal settings

TERMINALS [/ALL|n] (n can be 1 to 17) - change settings

tftp [/B|/C|/D|/E] [get] host:file - Modified tftp command, used to

transfer new updates to this box

(/B use network card B, /C use card C, etc.)

tftpkill - kill active tftp session.

TIMEOUT [t] - Display/set timeout on sys admin login

(t can be 0 to 9 minutes, 0 disables)

VERSION [/ALL|slot letter] - Report software version information

(/ALL - return version for all cards)

sys admin>>

A listing of abbreviations for the administrator commands is also available when

connected to the administrator port. The ABBREVIATIONS command is only available

when logged in.

sys admin>ABBREVIATIONS

ConsoleServer3200 Sys Admin Command Abreviations List

ABBREVIATIONS - A

ADDUSER - ADDU

BACKUP - (no abbreviation)

BREAK - (no abbreviation)

CHANGEPSWD - PASSWD

PSWD

CONNECTIONS - C

DELETEUSER - DELETEU

DEVICES - DEV

EDITUSER - EDITU

FORCELOGOUT - (no abbreviation)

HELP - H, ?