User's Manual

SAFETY AND WARRANTY INFORMATION
Safety Symbols
iv Safety and Warranty Information

SAFETY SYMBOLS
This section describes the safety symbols and classifications. Technical
specifications including electrical ratings and weight are included within the
manual. See the Table of Contents to locate the specifications and other product
information. The following classifications are standard across all ILX Lightwave
products:
• Indoor use only
• Ordinary Protection: This product is NOT protected against the harmful ingress of moisture.
• Class I Equipment (grounded type)
• Electrical Rating: 100 - 240 V; ~ 2.5A; 225W; 50/60 Hz
• Mains supply voltage fluctuations are not to exceed ±10% of the nominal supply voltage.
• Pollution Degree 2
• Installation (overvoltage) Category II for transient overvoltages
• Maximum Relative Humidity: <80% RH, non-condensing
• Operating temperature range of 10 °C to 40 °C
• Storage and transportation temperature of –40 °C to 70 °C
• Maximum altitude: 3000 m (9843 ft)
• This equipment is suitable for continuous operation.
Safety Marking Symbols
This section provides a description of the safety marking symbols that appear on
the instrument. These symbols provide information about potentially dangerous
situations which can result in death, injury, or damage to the instrument and other
components.
Caution,
refer to
manual
Earth
ground
Te rmina l
Alternating
current
Visible and/or
invisible laser
radiation
Caution, risk
of electric
shock
Protective
Conductor
Te rmina l
Caution, hot
surface
Frame or
chassis
Te rmina l
On: In position of a bistable push control.
The slash (I) only denotes that mains are on.
Off: Out position of a bistable push control.
The circle (O) only denotes that mains are off.
or
(I)
or
(O)