User's Manual

LigoWave Page 39
Use inform – select to wait for an acknowledgment from SNMP manager that trap was received.
Retry count – specifies maximum number of times to resend an inform request [1-10]. Default: 5.
Retry timeout – specifies number in seconds to wait for an acknowledgment before resending
request [1-10]. Default: 1.
SMTP Settings
Server address – specify the IP address or hostname of the networked SMTP server.
Server port – specify the SMTP Port Number is the port number used by the networked SMTP server.
By default the port number is 25.
Source e-mail – specify the e-mail address that will be used by the PTP unit.
Destination e-mail – specify the e-mail address where the PTP unit will send the alert messages.
E-mail notification interval – specify interval in seconds at which the e-mail notification will be sent
from the PTP unit [0-86400]. If 0 specified, then device will send an e-mail notification immediately
after unexpected system behavior.
Maintenance
Use Maintenance menu for device firmware update, reboot, reset device to factory defaults,
troubleshooting file download, view system log messages and control OLED.
System Functions
Figure 45 – Main System Functions
Reboot device – reboot device with the last saved configuration.
Reset device to factory defaults – click to restore unit's factory configuration values.
Resetting the device is an irreversible process. Current configuration and the administrator
password will be set back to the factory default.
Download troubleshooting file – click to download the troubleshooting file. The troubleshooting file
contains valuable information about device configuration, routes, log files, command outputs, etc.
When using the troubleshooting file, the device quickly gathers troubleshooting information
automatically, rather than requiring you to gather each piece of information manually.. This is helpful
for submitting problems to the support team.
Backup configuration file - click to save the current configuration file. The saved configuration file is
useful to restore a configuration in case of a device misconfiguration or to upload a standard
configuration to multiple devices without the need to manually configure each device through the web
interface..