User's Manual

LigoWave Page 47
 Mode: MIMO 2x2
 Data rate: 300 Mbps
 ACK timeout: Distance 0 km/miles
Click Apply button for configuration to take effect.
Step 4. Observe the Signal Indicator bar at the bottom of the screen. If it is green the quality of
the link is excellent whereas the red color indicates a poor quality of the link. If results
do not meet the requirements increase or decrease the Transmit Power on Radio page
depending on the status of the Signal Indicator bar. The Signal must be approximately
25-30dBm.
Step 5. Start the testing: start the iperf server , then iperf client:
Figure 55 – iperf Results (TCP)