User's Manual
Table Of Contents
- Copyright
- Notice
- Trademarks
- LigoPTP 24 Full Outdoor Units
- LigoPTP 24 Feature Summary
- Radio Parameters
- Application Examples
- Technical LigoPTP 24 Specification
- Cable Requirements
- Labeling
- Resetting the LigoPTP 24 FODU
- Web Interface
- Command Prompt Interface
- Radial MSE
- LDPC
- Main Configuration
- System Configuration
- IP Configuration Window
- Ethernet Configuration
- VLAN Configuration
- QoS
- SNMP Configuration
- Alarm Management
- Performance Management
- Ethernet Statistics
- Configuration File
- License Management
- Command Line
- File System
- Security Commands
- Other Available Accessories
- List of Abbreviations
Technical Description & Configuration Guide Overview
LigoWave Page 13
Labeling
The label can be found on the front side of the unit.
The label contains the following information (see samples in the picture below):
LigoPTP 24-
Product Number (I24FAE03L): product number contains information in which band side (L, H) the
FODU operates. Letters A, B, C or D indicate specific subband.
Unit Serial Number (3163901 00001); the serial number uniquely identifies the FODU.
Figure 5 – Labels of the LigoPTP 24 FODU Low and High band side, operating in 24 GHz band
Note that frequency range is set from the central frequency of the first 7 MHz channel to
the central frequency of the last 7 MHz channel (see below)
Figure 6 – Frequency range of the LigoPTP 24 FODU
The Figure explains Tx frequency range of low side LigoPTP 24 FODU radio.