User's Manual

Technical Description & Configuration Guide Miscellaneous Controls in Web
LigoWave Page 76
Execute current configuration  executes commands present in configuration script (command line
 cfg run);
Input file name to backup cfg in FODU memory  allows choosing file name under which current
configuration script will be saved in the LigoPTP 24 flash memory (command line – cfg backup <file>);
Input file name to restore cfg from FODU memory – allows loading configuration script from
previously saved backup file (command line  cfg restore <file>). To view the contents of flash
memory, go to 'Tools --> Command line' and type in 'tfs ls';
Enter string, which you want to save in cfg  allows you to enter desirable command, which will be
added to the configuration script as the last line (command line  cfg add <cmdline>);
Load factory configuration file  Resets the configuration by loading in EEPROM the script with
default settings. This command performs the following actions (in the following order):
 1. clears the current script from EEPROM,
 2. creates and stores in EEPROM the new script with the following settings:
 - net ip addr 192.168.205.10 or 192.168.205.11 (as marked on the label)
 - net ip remaddr 192.168.205.11 or 192.168.205.10
 - net ip mask 255.255.255.0
 - net ip gw  255.255.255.255 (default gateway - none)
 - SNMP trap 255.255.255.255 (none)
 3. restarts the management controller. (command line  cfg factory);
To save cfg file on your computer click here  allows downloading configuration script and saving it
on your hard drive.
Additional commands for script editing in Telnet/serial interface is displayed in the table below:
Command
Description
Cfg load
Loads the configuration script from EEPROM into RAM.
Cfg clear
Clears the script stored in RAM.
Cfg insert <line>
<cmdline>
Inserts typed command line with specified line number
into configuration script stored in RAM.
Cfg cmd <file with
commands>
Restarts CPU of management controller and loads
configuration script from the specified file.
Cfg group
Groups commands in configuration script.
License Management
License management allows specifying data transmit parameters and functionality for specific time
period or for unlimited time.
LigoPTP 24 without licensing option will operate with full functionality, but LigoPTP 24 with licensing
option but without activated licenses will operate with minimum functionality (7MHz channel bandwidth,
QPSK modulation, no ACM, no E1 channels). Functionality may be expanded using appropriate
license key.
Explanation of fields: