User's Manual

Installation
This chapter provides installation instructions for the hardware and software components of the
LigoPTP 3-N. It also includes the procedures for the following tasks:
 Hardware Introduction (LEDs, Connectors)
 Mounting LigoPTP 3-N
 Connecting the device
Package Contents
The LigoPTP 3-N comes with the following:
Component Name Quantity
Articulating Mounting Bracket Hardware 1
CAT5 Connector Cap 1
Integrated 18V PoE Power Supply & Injector 1
If any of these items are missing or damaged, please contact your reseller or LigoWave
sales representative.
Hardware Introduction
General Overview
The LigoPTP 3-N is housed in an aluminum enclosure and features an N-female type connector for
use with external antennas.
The bottom panel of the LigoPTP 3-N contains:
 A window to allow viewing of a series of indicator lights (LEDs) that help describe the state of
various networking and connection operations.
 Data/Power connection in the form of passive PoE through standard Ethernet cable
 N-Female type antenna connector
The label of the LigoPTP 3-N contains:
 Model name. The official model name is LigoPTP 3-N.
 FCC ID. The FCC ID is V2V-PTP3
LigoWave Page 8