User's Manual

Access the LigoPTP 5-23 MIMO PRO
The first connection to the LigoPTP 5-23 MIMO PRO can be made using a standard Ethernet
cable connected directly to your PC. See next sections for the instructions on how to access the
LigoPTP 5-23 MIMO PRO management interfaces.
Connection via WEB b ro ws er
The default IP address of the LigoPTP 5-23 MIMO PRO is 192.168.2.66 with a subnet mask of
255.255.255.0.
Step 1 Configure your PC with a static IP address on the 192.168.2.0 subnet with mask
255.255.255.0. Connect LigoPTP 5-23 MIMO PRO Ethernet interface in to the same
physical network as your PC. Open the Web browser and type the default IP address
of the LigoPTP 5-23 MIMO PRO: https://192.168.2.66/
Step 2 Enter the LigoPTP 5-23 MIMO PRO administrator login details to access the Web
management:
The default administrator login settings for all LigoPTP 5-23 MIMO PRO
are:
User Name: admin
Password: admin01
Step 3 After successful administrator log on you will see the main page of the LigoPTP 5-23
MIMO PRO Web management interface. The LigoPTP 5-23 MIMO PRO now is ready for
configuration. For further instructions on Web management refer to the respective
document at the LigoWave wiki
at http://www.ligowave.com/wiki
LigoWave Page 6