User's Manual

Quick Installation Guide Installation
LigoWave Page 7
This chapter provides installation instructions for the hardware and software components of the WBD-
500. It also includes the procedures for the following tasks:
 Hardware Introduction (LEDs, Connectors)
 Mounting WBD-500
 Connecting the device
Package Contents
The WBD-500 comes with the following:
Component Name
Quantity
60 Degree Mounting Bracket
1
CAT5 Connector Cap
1
Integrated 18V PoE Power Supply & Injector
1
#10 1/2 inch Type B Screws
4
If any of these items are missing or damaged, please contact your reseller or LigoWave
sales representative.
Hardware Introduction
General Overview
The WBD-500 is housed in a plastic enclosure and includes an N-Female type antenna connector for
use with external antennas.
The bottom panel of the WBD-500 contains:
 Data/Power connection in the form of passive PoE through standard Ethernet cable
 N-Female type antenna connector
The label of the WBD-500 contains:
 Model name. The official model name is WBD-500.
 FCC ID. This unit contains FCC ID V2V-WBD500
Installation