User's Manual

Quick Installation Guide Access the WBD-500
LigoWave Page 9
The first connection to the WBD-500 can be made using a standard Ethernet cable connected directly
to your PC. See next sections for the instructions on how to access the WBD-500 management
interfaces.
Connection via WEB browser
The default IP address of the WBD-500 is 192.168.2.66 with a subnet mask of 255.255.255.0.
Step 1 Configure your PC with a static IP address on the 192.168.2.0 subnet with mask
255.255.255.0. Connect the WBD-500 Ethernet interface in to the same physical network
as your PC. Open the Web browser and type the default IP address of the WBD-500:
https://192.168.2.66/
Step 2 Enter the WBD-500 administrator login details to access the Web management:
The default administrator login settings for all WBD-500 are:
User Name: admin
Password: admin01
Step 3 After successful administrator log on you will see the main page of the WBD-500 Web
management interface. The WBD-500 now is ready for configuration. For further
instructions on Web management refer to the respective document at the LigoWave wiki
at http://www.ligowave.com/wiki
:
Access the WBD-500