User's Manual

Lilee Systems™ TransAir™ PTC-3000 Family User Manual
Page 19
4 Installation
4.1 Connecting Cables
Please see Chapter 3 Interface Panel Connectors for pinout details of the connectors on
the PTC-3000. The following section describes how to connect cables and devices to the
PTC-3000. Connect according to your configuration requirements.
4.1.1 RJ45 to DB9 Console Cable (PTC-3000-1U)
Step 1: Locate the RJ45 Console connectors. The location of the RJ45 Console port
connector is shown in Figure 1.
Step 2: Align the connectors. Align the RJ45 connector on the LAN cable with the RJ45
Console port connector on the PTC-3000.
Step 3: Insert the RJ45 to DB9 cable RJ45 connector. Once aligned, gently insert the LAN
cable RJ45 connector into the PTC-3000 RJ45 connector.
Step 4: Connect to a PC. Locate a serial port connector on the PC to be used to configure the
PTC-3000.
Step 5: Insert the DB9 cable RJ45 connector. Insert the LAN cable RJ45 cable connector into
the RJ45 connector to a PC.
4.1.2 M12 to DB9 Console Cable (PTC-3201~4, PTC-3004, and PTC-3006 (M12))
Step 1: Locate the M12 Console connectors. The location of the M12 Console connectors is
shown in Figure 2.
Step 2: Align the connectors. Align the M12 connector on the LAN cable with the M12
Console connectors on the PTC-3000.
Step 3: Insert the LAN cable RJ45 connector. Once aligned, gently insert the LAN cable
RJ45 connector into the PTC-3000 RJ45 connector.
Step 4: Connect to a LAN router/switch. Locate the RJ45 connector on the PC to be used to
configure the PTC-3000.
Step 5: Insert the LAN cable RJ45 connector. Insert the LAN cable RJ45 cable connector into
the RJ45 connector on the LAN router or switch.