User's Manual

Lilee Systems™ TransAir™ PTC-3000 Family User Manual
Page 27
5 Configuring the PTC-3000
5.1 Configuration Commands
To begin configuring the PTC-3000, use a terminal emulation program like HyperTerminal,
PuTTy, or Tera Term to connect to the PTC-3000 and enter configuration commands.
Configure the terminal emulation program serial port settings as in the table below (also see
example configuration in Tera Term below):
Terminal Emulation Program Serial Port Settings
Value
Port
COM#
Baud Rate
115200
Data
8 bit
Parity
None
Stop
1 bit
Flow Control
None
Table 5-1 – LED Indicators
Figure 5-1 – Serial Port Settings