User's Manual
Lilee Systems™ TransAir™ PTC-3000 Family User Manual
Page 4
1.2 Safety Considerations
Please ensure the following safety precautions are adhered to at all times.
Follow electrostatic precautions whenever the PTC-3000 is installed. To prevent
malfunction or damage which may be caused by Electrostatic Discharge, the PTC-
3000 should be grounded. Before touching components or connecting/disconnecting
cables, the installer should touch a metal object to dissipate body charge.
Make sure the power is turned off and the power cord is disconnected
whenever the PTC-3000 is being installed or moved.
Do not apply voltage levels that exceed the specified voltage range. Doing so
may cause fire and/or an electrical shock.
Do not open the chassis when the PTC-3000 is running: Electric shocks can
occur.
If considerable amounts of dust, water, or fluids enter the PTC-3000, turn off the
power supply immediately, unplug the power cord, and contact the distributor or
sales representative.
DO NOT do the following:
o DO NOT drop the PTC-3000 onto a hard surface.
o DO NOT use the PTC-3000 in a site where the ambient temperature exceeds
the rated temperature.
1.3 ESD Notice
To prevent malfunction or damage to this product, which may be caused by Electrostatic
Discharge (ESD), the radio should be properly grounded at the time of installation. In
addition, the installer or maintainer should follow proper ESD precautions, such as touching
a bare metal object to dissipate body charge, prior to touching components or
connecting/disconnecting cables.
1.4 FCC/IC Approval Notice/ Avis d'approbation FCC/IC
This device is offered as a licensed transmitter per FCC Parts 80, 90, & 95 and IC RSS-119.
It is approved for use under the following conditions: Changes or modifications not expressly
approved by the party responsible for compliance will void the user’s authority to operate the
equipment.
Cet appareil est un émetteur conforme à la FCC partie 80, 90, & 95 et IC RSS-119. Son
utilisation est uniquement approuvée dans les conditions suivantes: Tout changement ou
modification non expressément approuvé par la partie responsable de la conformité
entraînera le retrait du droit d’exploiter l’équipement.
1.5 FCC Part 15 Notice/IC RSS-210_GEN Avis
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Any
unauthorized modification or changes to this device without the express approval of the